Solid Sawn Hangers
Deck Tie Back
DTB
Reference Series: DTT, FSC
The DTB-TZ Deck Tie Back provides positive anchorage between the deck framing and the exterior wall with a load carrying capacity that exceeds building code requirements. When used in conjunction with MiTek triple-zinc or gold-coat joist hangers, the DTB-TZ transfers the lateral loads into the exterior wall while the joist hangers support the vertical loads. The DTB-TZ can also be used to reinforce the connection between the rail post and the deck.
Materials: 14 gauge
Finish: G-185 galvanizing
Code Reports:
View Code Report Table
Resources
MiTek Product CatalogTechnical Bulletins
Installation
- Use all specified fasteners.
- Install with MiTek’s THR 1/2″ threaded rod or equivalent.
- Drive MiTek’s WS15-EXT structural wood screws into joist.
- Re-install threaded rod or anchor bolt. Secure with washer and nut.
- Tighten anchor bolt nuts finger tight to base plus 1/3 to 1/2 additional turns with wrench.
Need Help or Have a Question? Contact Customer Service or Call 800-328-5934
DTB-TZ Deck Tie Back
