Concrete and Masonry
Screw Anchors
PFM
Reference Series: THD
One-piece, heavy duty screw anchor with a finished hex head. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances.
Materials:
Finish: Zinc Plated or Mechanically Galvanized
Code Reports:
View Code Report Table
Installation
- Using the proper drill bit, drill a hole into the base material to a required depth.
- Remove dust and debris from hole.
- Select a powered impact wrench that does not exceed the maximum torque for the selected anchor diameter. Attach an appropriate sized hex socket/driver to the impact wrench. Mount the screw anchor head into the socket.
- Drive the anchor through the fixture and into the hole until the head of the anchor comes in contact with the fixture. The anchor should be snug after installation. Do not spin the hex socket off the anchor to disengage.
Need Help or Have a Question? Contact Customer Service or Call 800-328-5934
Screw-Bolt®+ Screw Anchor
