EWP Hangers

Fire Wall Hangers for CFS Construction

FWH-S

Reference Series: -- --
The FWH/S Fire Wall Hanger attaches to cold-formed steel wall framing to support cold-formed steel joists.
Materials: 14 gauge
Finish: G90 galvanizing
Code Reports: View Code Report Table

Options

Technical Bulletins

Installation

  • Install prescribed type and number of self-drilling screws through the round holes into the wall track. Install (5) self-drilling screws through the hanger into one side of the joist using the round and slotted holes.
  • Powder actuated fasteners are permitted.
  • Welding of the hangers is permitted. Place a minimum 1/8″ x 2″ fillet weld on each top flange of the hanger. Welding should be performed by a qualified welder using a qualified welding procedure while distributing the weld evenly across both flanges. Weld-on applications produce maximum allowable load listed. Uplift loads do not apply to this application.

Need Help or Have a Question? Contact Customer Service or Call 800-328-5934

FWH/S Fire Wall Hanger

FWH/S Fire Wall Hanger

FWH/S Fire Wall HangerTop view detail of weldsTypical FWH/S shallow-track-aligned installation - FIGURE 1Typical FWH/S deep-track installation - FIGURE 2Typical FWH/S deep-track aligned installation - FIGURE 3Typical FWH/S continuous HSS installation - FIGURE 4Typical FWH top flange offset left shown (Top View)

Option Details:

Code Report Table

MiTek Stock #
ICC-ES
IAPMO
FLORIDA
LA CITY
No Code Listing