Solid Sawn Hangers

Home / U.S. Products / Connectors / Solid Sawn Hangers / Strap Hangers

Adjustable Strap Skewed Hangers

MSHA

Reference Series: THASR/L

MiTek’s MSHA Series hanger offers the most flexible field solution for truss-to-truss connections accommodating a range of skews and challenging web-chord geometry often found in truss framing. Eliminating the need for special orders, the MSHA Series hanger provides economical solutions for 1-ply or 2-ply roof trusses and 1-ply floor trusses skewed between 22-1/2-degree to 75-degree. MSHA hangers can be installed in top-min, top-max, face-max, or combination mounting conditions as required.

Materials: 16 gauge

Finish: G90 galvanizing

Code Reports: View Code Report Table

Resources

MiTek Product Catalog

Options

Mounting Conditions
Installation Sequence for Skews greater than 22-1/2°

Installation

Install the required number of fasteners according to the load table.
Install fasteners into the carrying member at the locations described below based on the proper “Mounting Condition”.
Product is factory skewed 22-1/2° and may be field skewed from 22-1/2° to 75°. See installation sequence for skews greater than 22-1/2°.
Face-Max and Combination mounting conditions require a minimum chord or header height of 7-1/4″. Top-Max and Top-Min mounting conditions require a minimum chord or header height of 5-1/2″.

Need Help or Have a Question? Contact Customer Service or Call 800-328-5934